FOR SPECIAL LUMINAIRES
- Luminaires in listed buildings
- Luminaires with designs worth preserving
- Luminaires with special additional technological functions
FOR SPECIAL CEILINGS
- Recessed luminaires in special ceiling constructions (special dimensions, stretch ceilings, stucco)
- Ceiling appearance, architecture and spatial effect worth protecting
- Ceilings that must not be opened due to pollution burden
FOR SAFE PROCESSES
- Refurbishment without liability risk for the operator/installer
- Full manufacturer warranty
- Fast implementation for minimal operational interruptions
FOR MORE SUSTAINABILITY
- Costs and resources saved due to optimal use of existing lighting
- Reduction in energy consumption and carbon emissions due to LED technology
To convert the luminaire, simply replace the conventional lamp with a customised LEDKit. The luminaire body installed in or on the ceiling and the optical system continue to be used. The Re.Place LEDKit itself consists of a customised system module with LED board and the corresponding control gear unit. It can be installed on the room side with no interference to the ceiling structure. The result: the new system fulfils the legal requirements for sustainability and heritage protection while achieving top marks for efficiency and quality of light.
Depending on the age and condition of the existing lighting, it may also be necessary to replace the photometrically effective optical system as part of the refurbishment. TRILUX offers customers a wide range of appropriate conversion kits for most common lighting solutions. The LED technology and optics can be ideally adapted to the existing normative and lighting design specifications. Here again, installation is on the room side. The ceiling structure is retained while quality of light and efficiency reach a new level.
Wache GmbH, Lübeck
Reducing energy costs, improving quality of light.
An excellent example: the conversion of a production hall at Wache GmbH in Lübeck, Germany, during running operations. For modernisation of the existing T5 lighting system, the fluorescent tubes, reflectors and luminaire inserts of the obsolete trunking were removed without tools in just a few simple steps and the E-Line Re.Change insert was simply clicked into place.
Re.Now Concept
customised solutions for special cases
For everything out of the ordinary: With the TRILUX Re.Now refurbishment concept, recessed luminaires with uncommon dimensions can also be converted to LED without renewing the existing ceiling. Typical applications are lay-in, recessed or surface-mounted luminaires with dimensions differing from standard dimensions. Thanks to the high level of flexibility in terms of size and lighting technology, the customised refurbishment solution fulfils all normative requirements of the existing lighting. At the same time, it taps into the potential of LED technology in terms of efficiency and quality of light.